Spray Polyurethane Foam (SPF)

SPF or spray polyurethane foam describes a category of high-performance spray foam insulation and air barrier material that delivers multiple benefits in one application. These advantages include high insulation values, near-zero air permeability, increased building strength, severe weather and flood resistance, increased occupant comfort, improved indoor air quality, reduced operating costs and lower environmental impacts.

Because spray polyurethane foam is fully adhering and seals hard-to-reach penetrations, it provides unequaled air sealing properties for the entire building envelope. Reduced uncontrolled air leakage results in lower utility bills and reduced greenhouse gas emissions.

In fact, ENERGY STAR® reports that air leakage accounts for 25 – 40% of the energy used for heating and cooling a typical home. They estimate that a homeowner can save up to 20% on heating and cooling costs by proper sealing and insulating. SPF can go far in helping both home and commercial building owners achieve these savings.

BASF spray polyurethane foam products use zero-ozone-depleting blowing agents and emit no VOCs (volatile organic compounds). Moreover, the insulating air barriers also prevent outdoor allergens and pollutants from entering into homes providing improved indoor air quality. And due to their high R-value range and air barrier/infiltration characteristics, closed cell SPF like SPRAYTITE® and WALLTITE® have the lowest overall environmental impact in energy use, resource consumption, air emissions and land use. (Visit BASF Polyurethane Spray Foam Sustainability Proof Page Here).

BASF manufactures both closed cell and open cell spray polyurethane foam products for residential and commercial construction, providing the right SPF system for any type of well-engineered building envelope. The BASF two component application process features a wide range of specially formulated polyurethane spray foam offerings that meet specific site and surface requirements.

Additionally, BASF also offers a number of waterproofing or damp-proof coating materials resulting in high performance, durable BASF SPF Roofing Systems for any climate that stand the test of time.

Due to the technical skill required, these systems must only be applied by trained contractors within BASF’s approved applicator network.

SPRAYTITE® and WALLTITE® are registered trademarks of BASF.

ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).

We are accepting Crypto payments via Coinbase Commerce

Click Here

  • Stops air and moisture infiltration
  • Makes your home more comfortable
  • Saves on energy costs
  • Adds strength to the building structure
  • It is permanent and will not sag
  • Keeps dust and pollen out
  • Eliminates Ice Daming
  • Improves Air Quality
  • Reduces capacity requirements, maintenance and wear of HVAC equipment
  • Meets all building codes
  • Is your home drafty?
  • Do your floor stay cold in the winter?
  • Are your heating and air bill too high?
  • How much money can you save reducing energy loss?

Contact us for "Free Estimate" and see what plans might be avaialbe from the state to help you be more comfortable and save on energy cost.


Call us or press the button below


(425) 999-8493


Free Estimate

Testimonials

  • I found Jake enormously detail oriented in purchasing his equipment for AT-Foam. A tough sale to say the least but one that understood the importance of getting what he paid for and making sure what he got was what he paid for. That in itself should warrant a recommendation as most entrepreneurs these days are “instant gratification” oriented and focused exclusively on the cheap price. Good luck Jake & if I can help-you know where/how to reach me.

    Joe A Gayle III
  • We are finishing our basement and decided that spray foam would be a great way to both insulate and also create the vapor barrier for the exterior walls. Jake responded quickly with a quote. He recommended spraying the rim joists which I decided was a good idea. He then sprayed the walls with the “closed cell” foam and then we had him spray the HVAC ducts with open cell foam for noise attenuation. We were also building one room as a music room for our son who is playing the drumset. We had AT spray the open cell foam on the walls in this room to create a sound proof room.

    David McCoy
  • Older house poorly insulated, problem of freezing pipes and mice, they drilled holes in drywall and spray foam insulation inside walls. Sprays as liquid, fills areas, cracks and expands. They were knowledgeable about product and procedure. This company gave excellent service. It was snowing that day. They protected the carpet and entire area. Were considerate and completed in a timely manner. Excellent work performed.

    Barb Lesley